13 Analog output
13.1 What can I do with it?
Measurement values of level, distance, temperature and a status can be returned by two analog
4…20 mA signals. These analog signals can then be used to trigger a certain action, e.g. operate a
switch.
13.2 How to wire analog outputs
Connect the analog outputs of the USH-9 to a data acquisition device according to the figure below.
NOTE
If a data logger is connected to the IOUT outputs, the resistance of the
logger input(s) must not exceed 470 Ω.
13.3 Activation
In the setting
the state of the analog output can be set to on of the following options:
1
3
A
n
al
o
g
o
u
tp
u
t
Manual
95
