SOMMER USH-9, Руководство пользователя

Страница: 35 / 132

10.4.2 Establish a connection manually
1. Install the Commander support software as described in Installation of Commander .
2. Connect the device to your PC according to Connect the USH-9 to your PC .
3. Start the Commander software on your PC.
4. Select the required connection in the
Connections list of the Connections (F8) tab and click Con-
nect . If the connection was successful a green icon is displayed at the top-right corner of the
Commander window.
If you don't have the required connection available in the
Connections list, create a new con-
nection as described in Create a new connection .
To view the settings of the connected device or to read the current measurements, follow the steps
described in
Download setup and Record measurements .
10.4.3 Create a new connection
1. Select the Connections (F8) tab in the Commander.
2. Click New connection .
3. In the section Connection settings enter a name of the new connection, e.g. Serial-com1-9600 ,
and the connection type, e.g. Serial connection .
4. Enter the required information for the selected connection type.
If your USH-9 is wired to your PC with a RS-485 to USB converter cable, select the port where
the device is connected and select a Baud rate of 9800.
10.5 Working with stations
10.5.1 Create a station with the Communication assistant
In order to manage several data loggers, to connect to a data logger via IP-call and to download data,
stations can be created in the Commander software. To view a list of all stations select the tab
Stations (F7) .
Perform the following steps to create a new station with the Communication assistant :
1
0
S
u
p
p
o
rt
so
ft
w
ar
e
C
o
m
m
an
d
er
Manual 35