SOMMER USH-9, Руководство пользователя

Страница: 41 / 132

3. Select the Measurement (F3) tab.
4. In the Commands section click Start polling measurement . Now, the Commander will trigger
measurements of the USH-9 without any delays between measurements. The results are dis-
played
Measurement values and plotted in the Measurement data graph .
5. To finish polling mode click Stop polling .
NOTE The polling mode stops automatically after 30 minutes.
10.6.2 Record measurements
1. Establish a connection to your device as described in Working with connections .
2. Download the setup of your device as described in Download setup .
3. Select the Measurement (F3) tab.
4. If the connection with your device is active, the data will now be displayed in the measurement
table and updated at the interval specified in the setup. Also, the incoming data strings are dis-
played in the
Terminal .
5. Click Save measurement data in the Commands section to save the recorded measurements.
The data are saved as a *.csv file in the SommerXF format.
NOTE You can change the scope of the data output in the setup OP, inform-
ation .
1
0
S
u
p
p
o
rt
so
ft
w
ar
e
C
o
m
m
an
d
er
Manual 41