n
Click
Program
n
Unpower the data logger
n
Wait 3…5 seconds
n
Repower the data logger
The firmware currently present on the data logger is now erased and the new one copied to
the data logger. During the update process the pop-up window may show the following mes-
sages:
The programmer is not ready; power needs to be on.
The programmer is active.
The firmware update has finished.
6. Close the programmer-window as soon as the firmware update has finished.
7. Switch off and repower the data logger again.
8. Open the
Parameters (F2)
tab.
1
0
S
u
p
p
o
rt
so
ft
w
ar
e
C
o
m
m
an
d
er
Manual
45
