3. Acknowledge the safety-note.
4. Enter
X
until you get back to the main menu. The Sommer-sensor is now restarted and
available in its initial configuration. As the connection-parameters have been changed to
the default settings, the connection to the sensor is lost. Press
Disconnect
for com-
pletion.
7. Establish the original connection to the Sommer-sensor as described in
8. Download the sensor’s parameters in the
Parameters (F2)
tab, adapt the required parameters,
or upload your originally saved parameter file to the USH-9.
12.5.7 PLC integration
The USH- 9 can be integrated into a PLC system as a slave device. It supports the PROFIBUS,
PROFINET, EtherCAT and CANopen protocols. This requires an additional serial converter, e.g. Anybus
Communicator.
1
2
C
o
m
m
u
n
ic
at
io
n
94
Manual
