Chapter 9: System Configuration
This chapter describes how to configure your StorEdge system by setting up the communication
between the system components and setting up the required application.
Configuring the RS485 Bus for Battery and Meter
Connection
This section describes how to set up the RS485 communication between the inverter, meter and battery.
Some inverters are equipped with a built-in Revenue Grade Meter (RGM), which is located in the StorEdge
Connection Unit. When an additional meter is installed for these inverters, the second meter is
connected to the existing RGM in a daisy chain.
To configure the RS485 bus:
1. Turn OFF or verify that the StorEdge Connection Unit switch is OFF.
2. Turn the inverter ON/OFF switch to OFF.
SolarEdge
-
StorEdge Installation Guide MAN-01-00262-1.0
62
Chapter 9: System Configuration
Содержание storedge
Страница 1: ...SolarEdge StorEdge Installation Guide For North America Version 1 0 ...
Страница 95: ......