SMC Networks EZ Connect Vision SMCWIPCFN-G, Руководство пользователя

Страница: 6 / 89

5
Industry Canada Statement
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the
device
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors
is subject to licensing.
This device has been designed to operate with an antenna having maximum gain of 1.5dBi.
Any antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the EIRP is not more than required for successful communication.
EC Declaration of Conformity
SMC contact for these products in Europe is:
SMC Networks Spain, S.L.
Edificio Conata II,
Group CTSG
Fructuos Gelabert 6-8 2o2a
08970 Sant Joan Despi, Barcolona,Spai
n
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive
of the European Union (1999/5/EC). This equipment meets the following conformance standards.
EN 55022:2006 Class B EN61000-3-2 : 2006 EN61000-3-3 : 2005
EN 55024: 2003 : EN61000-4-2: 2001 EN61000-4-3 : 2006
EN61000-4-4: 2004 EN61000-4-5 : 2006
EN61000-4-6: 2001 EN61000-4-11 : 2004