SMC Networks EZ Connect Vision SMCWIPCFN-G, Руководство пользователя

Страница: 57 / 89

56
immediately.
STEP 7: Create it to Alarm Action List
Click “Create” to add action to
alarm action list. If no further
action to add, click “Close”
to
dismiss this window.
STEP 8: Click “Add” to add new Alarm Action.
STEP 9: Click “OK” to save all alarm action configuration (including “Add”,
“Modify”, “Remove” and “Copy”) and close this window. Click “Cancel” to
ignore all configurations and close this window.
Alarm Action Table
Alarm Action Use To
Digital Output - ON Set the Digital Output On
Email When there is a breach, a snapshot will be taken and
notification email will be sent. Only one email address can be
associated for this action.
Live Video
The live video of breached camera, it will pop up in Monitor’s
4-split screen.
Digital Output - OFF Set the Digital Output Off
Preset The “Action Device” specifies the video source with gimbal, and
“Preset” specifies which preset position the gimbal should turn
to.
Recording
The alarm recording of breached camera; it is set by number of
seconds.
“Alarm Breach” Scenario
Set alarm triggered by Camera-image 1 and records the video of Camera-image 2:
Select Camera-image 1 icon in System setup Area and click Image Alarm button from
Menu bar, then select “Alarm action” by Recording and “Acting Device” by “Camera-image
2”
“Alarm Live Video” Scenario
1. If only one alarm is triggered, the different device breached by “live video” alarm action
will be displayed on the 4 split screen of Monitor Program and is arranged starting from
upper-left to upper-right, lower-left, and lower-right.
2. If live video is breached by different alarm source, the live video of the latest event will
replace the live video of an older event. If the number of live video is greater than 4, they
will be displayed rotationally.
3. To dismiss the live video in 4-split of monitor program, click “Cancel Alarm” button in
Monitor Program.