SKF Baker AWA-IV 12 HO, Руководство пользователя

Страница: 82 / 214

Step Voltage test
The Step Voltage test, also called a step test, is described in detail in IEEE 95. Clicking on the
dropdown arrow for HiPot tests reveals the Step Voltage test. Clicking on the Step Voltage
test menu item will start the Configuration Wizard used to set up the test.
Figure 62. Step voltage Config Wizard—step 1.
Fill in the appropriate information for the steps needed. Make sure the steps are appropriate
for the application being tested.
The second window is used to enter up to 30 voltage steps or test intervals for each step.
This window will also appear when the Step Voltage test runs and will display a real-time
graph of the voltage and current collected during the test. After this test has been set up, it
can be edited prior to running. Click on Config in the DC Tests setup window and the second
step page appears.
Figure 63. Step voltage Config Wizard—step 2.
62 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
Baker AWA-IV software overview