SKF Baker AWA-IV 12 HO, Руководство пользователя

Страница: 136 / 214

When you have completed your test setup and executed the related tests for both Test IDs,
your compiled test results will look similar to the example shown below, with results shown
for field and armature within the same Motor ID.
Figure 118. Hi-L armature and field test results list in Data tab.
Again, using this approach, you need to ensure that the two Test IDs created for the motor
are selected and run in turn.
An alternative is to create separate Motor IDs with similar names, perhaps adding “Armature”
and “Field” to the end of each Motor ID. In this instance, you will not need to remember to
select and run two Test IDs for the single Motor ID; however, you will need to run each Motor
ID separately and combine test results manually if needed.
116 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
Special features of the Baker AWA-IV