SIGRIST OilGuard 2 Ex, Инструкция по эксплуатации

Страница: 65 / 106

Servicing Instruction Manual OilGuard 2 Ex
13003E/3 65
9.1 Servicing schedule
WHEN WHO WHAT PURPOSE
Every 3
months and at
every oppor-
tunity Operator Leakage check on the
measuring cell KPFL 30.
Section 9.2 Preventing corrosion and main-
taining measuring accuracy.
Every 3 mon-
ths Operator Recalibrate the photome-
ter. Section 9.3 Measure for maintaining meas-
uring accuracy. Interval depen-
dent on medium.
Every 6
months or as
needed Operator Check and any cleaning of
the measuring cell KPFL
30. Section 9.4 Obligatory measure for main-
taining measuring accuracy.
Every 2 years
or as needed Service
center Replace the seals on the
closed measuring cell. Sec-
tion 9.5 Obligatory measure for main-
taining functional efficiency.
Every 5 years
or as needed Operator /
service
center Replace the measuring cell
windows on the closed
measuring cell KPFL 30.
Section 9.5 Measure for maintaining meas-
uring accuracy. Interval de-
pendent on medium and oper-
ating conditions.
Every 6
months or as
needed Operator Replace the pump mem-
brane according to the
Service & Operating Man-
ual VERSA-MATIC.
Section 1.4 Obligatory measure for main-
taining functional efficiency.
Annually or as
needed Operator Clean the free-fall measur-
ing cell KPFLJC PVDF.
Section 9.6 Obligatory measure for main-
taining measuring accuracy. In-
terval dependent on medium.
Every 2 years Operator Replace the light source.
Section 9.8 Obligatory measure for main-
taining measuring accuracy.
Every 5 years Operator Replace the fan.
Section 9.9 Maintaining the cooling in the
housing.
As needed Operator Replace the inlet pipes:
Inlet pipe KPFLJC PVDF
Section 9.10 / Inlet pipe
KPFLJ VA Section 9.11 /
Short inlet pipe PVDF of
sample conditioning sys-
tem Section 9.12
Obligatory measure for main-
taining functional efficiency.
As needed Operator Clean the sample prepara-
tion system and replace
the cover seal.
Section 9.13 Obligatory measure for main-
taining functional efficiency.
As needed Operator Clean the pipes.
Section 9.14 Obligatory measure for main-
taining functional efficiency.
Table 1: Servicing schedule