SIGRIST OilGuard 2 Ex, Инструкция по эксплуатации

Страница: 19 / 106

General safety points Instruction Manual OilGuard 2 Ex
13003E/3 19
CAUTION!
Moisture and condensation on electronic components during servicing duties.
The photometer may be damaged if moisture enters the inside of the instrument.

Work inside the instrument may only be carried out in dry conditions. In doing so, the
instrument should be at operating temperature or room temperature (avoid condensa-
tion on optical and electrical surfaces).
CAUTION!
Use of aggressive chemicals when cleaning.
The use of aggressive cleaning agents can lead to damage to the instrument components.

Do not use aggressive chemicals or solvents when cleaning.

If the instrument should come into contact with aggressive chemicals, then clean it im-
mediately with neutral cleaning agents.
3.2 Residual risk
WARNING!
According to the risk assessment of the applied safety directive DIN EN 61010-1,
there remains the risk of the displayed measuring values being incorrect. This risk
can be reduced with the following measures:

Use an access code to prevent unauthorized persons from changing parameters.

Perform the specified servicing duties.
3.3 Warning and danger symbols on the instrument
WARNING!
There are no warning or danger symbols on the instrument.
Users must ensure that they observe the safety measures as specified in the Instruction Man-
ual at all times when working with the instrument and its peripheral equipment, even if no
warning or danger symbols are attached to the instrument.
The following sections must be internalized:

Section 1.8

Section 1.11

Section 1.12

Section 3.1

Section 3.2

Observe safety pointers when performing the described procedures.

Observe local safety pointers.