SIGRIST OilGuard 2 Ex, Инструкция по эксплуатации

Страница: 30 / 106

Instruction Manual OilGuard 2 Ex Mounting
30 13003E/3
For the montage of the sample return pump according to the following process:
WORKSTEP ADDITIONAL INFO / IMAGES
1. Preassemble the pump bracket on the stand
using the four screws.
2. Position the pump on the bottom pump
bracket.
3. Adjust the position of the pump by moving the
pump bracket.
Fix the pump bracket in place by tightening the
screws (circles).
4. Connect the separately delivered tubing (, pos.
2) to the pump inlet (Figure 5, pos. 3).
5.
The sample retake has to be accomplished
by the customer.
For this action the pump output (Figure 5, pos.
9) must be used. The outlet connection is in-
ternally threaded with 1/2" NPT (arrow).
6. Attach the earth (Figure 5, pos. 7) to the
pump.
The earth is fixed to the stand on one side and
on the foot of the pump on the other.