SIGRIST OilGuard 2 Ex, Инструкция по эксплуатации

Страница: 49 / 106

Operation Instruction Manual OilGuard 2 Ex
13003E/3 49
7.8 Displays in measuring operation
Figure 13: Displays in measuring operation

Measuring value(s)
For values which are greater than
the maximum measuring range, no
measuring value is displayed; in-
stead,
**** is displayed.

Status line
In measuring operation, the status line
is green and shows the date and time.
If faults should occur, warning
and fault messages are shown and the
status line changes to orange or red.

Interface information

Top left: Logger status

Top right: Modbus, HART or
Profibus status

Below: Ethernet IP status
The following messages are
possible:
- IP not connected (cable not
connected)
- IP DHCP running…
- IP 169.254.1.1 (example)
Color coding:
Black Not active / not
present
Blue Activated, in quiescent
mode
Green Active
Red Fault

Touchscreen info
Display for indicating the functionality
of the touchscreen

The smaller bar on the left is green
when there is a connection to the
touchscreen controller (in the event
of a fault, this bar is red).

The larger bar on the right changes
color from blue to green with each
detected press of a button. If this
bar continuously changes color,
this indicates a pressure spot on
the touchscreen. Please contact the
service center (Section 11).

Channel name with unit
The channel names shown in
the figure are examples and can be
adjusted individually.
