Instruction Manual ColorPlus Ex
10210E/5
33
4.6
Configure the channels
Depending on the instrument type, the instrument can have 1..3 channels
(wavelengths) and two calculation channels (math channels).
All of the channels are configured at the factory to suit the user’s needs. No
setting is required upon installation.
4.7
Set the relay functions
All control units have two freely configurable relay outputs.
Several functions can be assigned to a given relay. The relay in question will
be activated whenever
one
of the configured functions becomes active (OR
link).
Action
Display (example)
Remarks
1.
Activate service mode.
* 100% ADJUST. *
* *
Section 4.3
2.
3 x
* CONFIGURATION*
* *
3.
Configure relay 1
8 x
.
> Relay 1 <
li al se wa in
4.
Activate editing mode
with
.
Relay 1
>li al se wa in<
5.
Assign functions:
/
Function
on/off
/
Change
function
Relay 1
>LI al se wa in<
li = Limit 1
exceeded
al = Alarm (fault
has occurred)
se = Instrument in
service mode
wa = Warning
(warning
situation has
occurred)
in = Relay inverted
Functions in CAPITAL
LETTERS are activated
(e.g. LI).
6.
Confirm selection with
.
> Relay 1 <
LI al se wa in
7.
Configure relay 2 with
.
> Relay 2 <
li AL se WA in
8.
Activate editing mode
with
.
Relay 2
>li AL se WA in<
Содержание ColorPlus Ex
