Siemens simovert masterdrives, Справочник

Страница: 406 / 1547

Communication / PROFIBUS 09.2008
6SE7087-6QX70 (Version AK) Siemens AG
8.2-76
Compendium Motion Control SIMOVERT MASTERDRIVES
When configuring the CBP, please use the SI8045AX.200 type-
description file on the CD only if the CBP has not yet been included in
the supplied version of the COM package.
Then copy the type-description file into the "TYPDAT5X" directory of the
COM installation in the PG/PC.
From COM PROFIBUS V3.2 onwards, the CBP is included as standard
and the type-description files on the CD are then of no significance.
When a CBP is being configured (pull out the selector buttons "DRIVES"
on the bus cable) and the suggested slave address is confirmed, a
selection mask called "Slave characteristics" appears on the screen. It
has the following appearance:
The required type of PPO is selected with this planning tool from a
selection table called "Required configuration". This table appears
automatically when the menu item "Configure" is selected.
More information on how to configure data exchange between a CBP
and a SIMATIC S5 can be found in the description accompanying the
DVA_S5 module package.
The DVA_S5 module package (variable-speed drives with the SIMATIC
S5) implements data transfer between SIMATIC and SIMOVERT slaves
in accordance with the PROFIBUS profile for variable-speed drives and
thus facilitates creation of the user program. A data module with the
same appearance is always provided as the data interface, irrespective
of which S5-CPU the program runs on. The programmer, therefore, does
not need any detailed knowledge of the SIMATIC S5 system architecture
or of the system functions which may be required.
The DVA_S5 module package can be obtained from A&D WKF
Fürth/Germany under MLFB 6DD1800-0SW0.
COM ET200 WIN
and
COM PROFIBUS
Using the DVA_S5
module package