Siemens simovert masterdrives, Справочник

Страница: 1436 / 1547

Connector number Connector name Description Double word DSP
KK0813 Displ Abs Fixed connector for setting the
absolute displacement angle. As
standard, it acts upon the input
connector U678
U677 -> KK813 -> U678
in function diagram: 841.2
yes no
KK0814 Displ Relative Relative displacement angle.
Fixed connector of U677.02
in function diagram: 841.2
yes no
KK0815 V IN Virt Speed setpoint of the virtual master
axis
in function diagram: 832.4
yes no
KK0816 V_Virt_Master Speed setpoint of the virtual master
axis
in function diagram: 832.8
yes no
KK0817 PosSetp VMAxis Position setpoint of the virtual master
axis
in function diagram: 832.8
yes no
KK0818 V.SetpVirMast Speed setpoint for virtual master axis
in function diagram: 832.1
yes no
KK0819 SetV VirtMast Fixed value for the set value virtual
master axis
in function diagram: 832.5
yes no
KK0820 V.VirtMast% Speed output of the virtual master axis
in %
in function diagram: 832.8
yes no
KK0821 TS_FC_cluPosOFF Fixed setpoint for disengaging position
In function diagram: 834a.1
yes no
KK0822 TG_FK_ClutchPos Fixed setpoint for offset coupling
position
in function diagram: 834a.2
yes no
KK0823 SetVal Table Fixed connector for set value table
U622
in function diagram: 839.4
yes no
KK0824 X-Pos Table Table position of the x-axis can be
read out here.
x-axis = master position.
in function diagram: 839.3
yes no
KK0825 Y-Pos Table Table position of the y-axis can be
read out here.
y-axis = slave position
yes no
KK0826 Corr'n Value Position correction value
in function diagram: 843.2
yes no
KK0827 RestVal Offs Residual distance of offset angle
correction connector
In function diagram 841.8
yes no
KK0828 KKSyncCorrVal Correction value [LU] of synchronizing
difference (deviation of master/slave
position)
yes no
KK0829 ActSpeedDisplac Contains the current speed in percent
related to the positioning speed
(U697.2)
yes no
KK0830 MastVal FN335 Fixed connector 0
In function diagram: 15.4, 290.2
yes no
KK0831 KK MV Corr Rest Remaining distance [LU] of master
value correction out of master value
correction/master value offset
yes no
KK0832 DisplaceAngle Output of the additives
Relative displacement angle setting
[%] 32 bit
yes no
20
Siemens AG 6SE7087-6QX70 (Edition AL)
SIMOVERT MASTERDRIVES Compendium Motion Control