Siemens SIMATIC RF166C, Руководство по эксплуатации

Страница: 92 / 176

Configuration using the WBM
7.3 The menu items of the WBM
SIMATIC RF166C
92
Operating Instructions, 12/2019, C79000-G8976-C578-01
Note
Restrictions when transferring the configuration
Note that you as "User" can only transfer changes when the device status of the
communication module is "Idle". As an "administrator", you can also transfer changes even
when the device status is "Run".
The following table provides you with an overview of the menu items that are restricted for
the "User" role:
Table 7- 20 Restrictions for the "User" role
Menu items Restrictions
Start page
• Restricted:
Input boxes cannot be filled.
•
No operator control is possible in the "Run" device status.
Diagnostics
Hardware diagnostics No operator control is possible in the "Run" device status.
Log Restricted:
The log cannot be reset.
Syslog log The page is not displayed.
Edit transponder No operator control is possible in the "Run" device status.
User management Restricted:
Only the user's own password can be changed.
System No operator control is possible in the "Run" device status.
In addition, changes cannot be transferred to the communication module using the "Transfer
configuration to communication module" button.
User management on / off
Click the "Disable user management" button if you want to disable user management again.
Note that any user has all read/write privileges (administrator rights) when user
administration is disabled.
7.3.11 The menu command "System - System settings"
In the "System - System Settings" menu item, you can update firmware, reset the
communication module to the factory settings, change the IP address of the communication
module, load certificates on the communication module and transfer control files to the PC.
This page is divided into the following areas:
● Firmware update
● Reset
● IP address