Siemens BT300 LonWorks, Руководство оператора

Страница: 9 / 180

How to Use this Manual
9 | 180
Siemens Industry, Inc.
Siemens BT300 HVAC Drive DPD01809
Building Technologies 2016-06-07
How to Use this Manual
About This Manual
This manual is written for the owner and user of the BT300 HVAC Variable Speed Drive. It is designed to help you
become familiar with the BT300 HVAC Variable Speed Drive and its applications.
This section covers manual organization, document conventions and symbols used in the manual, how to access
help, related publications, and any other information that will help you use this manual.
Document Conventions
The following table lists conventions to help you use this manual in a quick and efficient manner.
Convention Examples
Numbered Lists (1, 2, 3…) indicate a
procedure with sequential steps.
1. Turn OFF power to the field panel.
2. Turn ON power to the field panel.
3. Contact the local Siemens Industry representative.
Conditions that must be completed or met
before beginning a task are designated with a
⊳.
Intermediate results (what will happen
following the execution of a step), are
designated with a ⇨.
Results, which inform the user that a task was
completed successfully, are designated with a
⇨.
⊳Composer software is properly installed.
⊳A Valid license is available.
1. Select Start > Programs > Siemens > GMS >
Composer.
⇨The Project Management window displays.
2. Open an existing project or create a new one.
⇨The project window displays.
Actions that should be performed are specified
in boldface font.
Type F for Field panels.
Click OK to save changes and close the dialog box.
Error and system messages are displayed in
Courier New font.
The message
Report Definition successfully
renamed
displays in the status bar.
New terms appearing for the first time are
italicized.
The field panel continuously executes a user-defined set
of instructions called the control program.
This symbol signifies Notes. Notes provide additional
information or helpful hints.
Cross references to other information are
indicated with an arrow and the page number,
enclosed in brackets: [→92]
For more information on creating flowcharts, see
Flowcharts [→92].
Placeholders indicate text that can vary based
on your selection. Placeholders are specified
by italicized letters, and enclosed with brackets
[ ].
Type A C D H [
username] [field panel #].