Siemens BT300 LonWorks Скачать руководство пользователя страница 163

Страница: 163 / 180

Chapter 4 - Parameters and Menu Structure

Favorites (M7)

163 | 180

Siemens Industry, Inc.

Siemens BT300 HVAC Drive

DPD01809

Building Technologies

2016-06-07

Table 135: Parameter Backup.

Structure

Parameter

Description

P6.5.1

Restore Factory

Default

831

Activation parameter for restoring parameters to the factory settings.

NOTE: Does not reset: Time (P5.5.2), Date (P5.5.3), Year (P5.5.4), Daylight Saving (P5.5.5)

P6.5.2

Save to Keypad

2487

Initiates a copy of the active set of parameters to the keypad's storage location.

P6.5.3

Restore from Keypad 2488

Initiates a copy of the keypad's storage location to the active set of parameters.

P6.5.4

Save to Set 1

2489

Initiates a copy of the active set of parameters to the drives set 1 storage location.

P6.5.5

Restore from Set 1

2490

Initiates a copy of the drives set 1 storage location to the active set of parameters.

P6.5.6

Save to Set 2

2491

Initiates a copy of the active set of parameters to the drives set 2 storage location.

P6.5.7

Restore from Set 2

2492

Initiates a copy of the drives set 2 storage location to the active set of parameters.

Parameter Compare (M6.6)

The keypad can be used to compare the drive’s active set of parameters to default values, stored sets on the drive,

and the stored set on the keypad. See the

Parameter Backup (6.5)

section for details on how to back up and

restore using these sets.

Table 136: Parameter Compare (M6.6).

Structure

Parameter

Description

P6.6.1

Active Set-Set 1

2493

Initiates a compare of the drive‘s active parameter set to the saved set 1. All

parameters that are different are displayed, with values.

P6.6.2

Active Set-Set 2

2494

Initiates a compare of the drive‘s active parameter set to the saved set 2. All

parameters that are different are displayed, with values.

P6.6.3

Active Set-Defaults

2495

Initiates a compare of the drive‘s active parameter set to the default values. All

parameters that are different are displayed, with values.

P6.6.4

Active Set-Keypad Se

2496

Initiates a compare of the drive‘s active parameter set to the keypad saved set. All

parameters that are different are displayed, with values.

Favorites (M7)

Favorites are typically used to collect a set of commonly referred to sets of parameters or monitoring signals from

any of the keypad menus. Items can be added to the Favorites folder by selecting the Add To Favorites option.
To remove an item from the Favorites menu, select the item in the Favorites menu, and then select the Rem from

Favorites option.

User Levels (M8)

User level parameters are intended to restrict the visibility of parameters and prevent the unauthorized and

inadvertent parameterization on the keypad.
To lock the keypad from unauthorized changes, complete the following steps:

Set Access Code (P8.2) to a value other than 0.

NOTE:

Store this access code in a safe place. If the code is lost, the only method to recover

is to reload firmware and re-commission the drive.

Содержание BT300 LonWorks





















































































































































































Результаты поиска

Содержание BT300 LonWorks

Отзывы:

Похожие инструкции для BT300 LonWorks

Бренды по названию

Популярные бренды

Siemens BT300 LonWorks, Руководство оператора

Результаты поиска

Содержание BT300 LonWorks

Отзывы:

Похожие инструкции для BT300 LonWorks

Бренды по названию

Популярные бренды