Stored IPv4 settings available using ION Setup
Parameter
Value
Description
IP address
Contact your local network
administrator for parameter
values.
The IP address of your device.
Subnet Mask
Contact your local network
administrator for parameter
values.
The subnet IP address of your
network.
Gateway
Contact your local network
administrator for parameter
values.
The gateway IP address of
your network.
Stored IPv6 address settings available using ION Setup
Parameter
Value
Description
Global Address
Contact your local network
administrator for parameter
values.
The Internet protocol address
of your device.
Default Gateway
Contact your local network
administrator for parameter
values.
The address the meter uses to
route communications to a
different network or subnet.
If you do not set this or the
address is incorrect, you may
see slow communications or
communications errors.
ION Setup reconnection
If you change the settings for the Ethernet connection method you are currently
using to connect to the meter, ION Setup tries to reconnect to the meter using the
updated information. You can view the process in the
Device reconnection
dialog
box that appears.
•
If ION Setup can successfully communicate using the new setting, this setting
appears in the
IP Address
dropdown list and the checkbox is selected. Click
OK
to copy this information into the
IP address
field in the
Device
Properties
. ION Setup will now use this address to communicate with the
device.
•
If ION Setup cannot successfully communicate using the new setting, the new
address appears in the
IP Address
but the checkbox is not selected. Either
select the checkbox and click
OK
(for example, you may want to use the new
setting if you are replacing a meter in service) OR select another address
option from the dropdown list. Click
Test
to check that ION Setup can
communicate with the meter using the new address, select the checkbox,
then click
OK
.
Configuring general Ethernet settings using ION Setup
You can configure your device’s general Ethernet settings using ION Setup.
1. Start ION Setup.
2. Open the
Setup Assistant
for your device.
3. Select
Communications
>
Basic Ethernet
and click the
TCP/IP
tab.
32
7EN05-0390-00
Содержание 9810 Series
Страница 1: ...9810 series User manual 7EN05 0390 00 09 2018 www usa siemens com pds ...
Страница 4: ......
Страница 12: ......