Siemens 9810 Series, Руководство пользователя, Страница: 141 / 218

Power quality
10. Click Finish .
You are returned to the Sag/Swell Logging screen and the entry shows your
new configuration.
If nothing happens when you click Finish , check the log depths and buffer
depths for all your other data logs to make sure that the meter has enough
memory for these changes. Adjust the log depth and buffer depth of the data
and waveform recorders if needed.
Related Topics
• Sag/swell alarms
• COMTRADE implementation overview
• Changing log interval and depth settings using ION Setup
Transient overview
Your meter monitors your power system’s voltage and detects ITI (CBEMA) type
disturbances related to transients.
When voltage transient limits are defined and alarming is enabled, the meter
reports the disturbance’s magnitude and duration, and logs data and waveform
records associated with the disturbance.
Related Topics
• Transient alarms
Configuring Transient logging using ION Setup
Use ION Setup to configure your meter to log data and waveform records related
to voltage transient events, and to export the waveform data to COMTRADE files.
NOTE: Transient Log (Data Recorder #15) records voltage transient related
data.
To set up the Transient Log, Transient Waveform Log and Transient COMTRADE
files:
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Navigate to Power Quality > Transient Logging .
4. Select the data log and click Edit . Enter the meter password if prompted.
The Transient Logging Wizard appears.
5. The Device setting verification screen displays the results of meter
configuration check for potential errors related to transient monitoring and
reporting. Click
Fix to view details, or click Next to ignore the results and
proceed to the next screen.
6. The Transient Logging Setup screen displays Transient data recorder’s Log
Depth setting. You can change the maximum number of records to store in
the Transient data log. Click Next to proceed to the next screen.
7EN05-0390-00 141