Siemens 9810 Series Скачать руководство пользователя страница 149 | Manualshive

Страница: 149 / 218

Siemens 9810 Series Скачать руководство пользователя страница 149

Disturbance direction detection events

The results of the disturbance direction detection algorithm appear in the meter’s
event log.

The image below shows an example of how the Disturbance Direction Detection
event appears in your meter’s event log when viewed using ION Setup.

NOTE:

You can view your meter’s event log throughION Setup, the meter

webpages or display.

See the

ION Reference

, available from www.usa.siemens.com/pds, for more

detailed information about the Disturbance Direction Detection module.

Related Topics

Event log overview

COMTRADE

Your meter can generate COMTRADE files and store them on the meter’s internal
FTP site.

COMTRADE stands for COMmon format for TRAnsient Data Exchange defined
by IEC 60255-24, and defines a common format for power quality event
(disturbance) data in order to simplify retrieval, analysis and exchange of
disturbance data between multiple sources and vendors.

The format of your meter’s COMTRADE files is as defined by IEC 60255-24.

COMTRADE can be used in conjunction with IEC 61850.

See the

COMTRADE and ION technology

technical note, available from

www.usa.siemens.com/pds, for detailed information about COMTRADE file
formats and implementation.

Related Topics

COMTRADE implementation overview

COMTRADE is configured as part of the default waveform recording framework.

COMTRADE records are generated for sag/swell events. Configure your meter
nominal voltages to enable waveform recording. COMTRADE records are stored
as read-only files on your meter’s internal FTP server, and are deleted when you
perform a Master reset of the meter, upgrade firmware or make changes to the
waveform recorders.

By default:

•

The meter is configured so COMTRADE records are generated for the default
waveform recorders.

NOTE:

If you add additional waveform recorders and you want

COMTRADE files generated for these new recorders, you need to
configure a new COMTRADE module using ION Setup Advanced mode.
You can configure up to three COMTRADE modules.

•

The oldest COMTRADE record is overwritten by the newest record when the
COMTRADE depth is exceeded.

7EN05-0390-00

149

«
...
147
148
149
150
151
...
»

Содержание 9810 Series



























































































































































































































Отзывы:

Нет отзывов