Siemens 9810 Series Скачать руководство пользователя страница 120

Страница: 120 / 218

Security

10. If you have selected standard security, click

Finish

. You are prompted to save

your security configuration to a file which can be loaded onto other meters.

NOTE:

If you chose to save your security file, enter a descriptive name

and click

Save

. It is recommended that you do not overwrite the default

security files.

If you have selected advanced security, click

Next

to configure user access

and passwords.

Security parameters available using ION Setup

Parameter

Standard/advanced

Details

Meter password

Standard/advanced

Default meter password is 0 (zero).

Active web server

Standard/advanced

This option allows you to enable or disable your meter’s webpages.

Allow web server
programming

Standard/advanced

This option allows you to enable or disable the ability to configure your meter
using the meter’s webpages.

NOTE:

To enable allow web server programming, you must have active web

server enabled.

Allow Modbus
programming

Advanced only

This option can only be enabled in advanced security and is disabled for standard
security.

Allow front panel
programming

Standard/advanced

This option allows you to enable or disable the ability to configure your device
using the display.

Allow broadcasting time
synchronization

Advanced only

This option can only be disabled in advanced security and is enabled for standard
security.

Protocol-specific security parameters available using ION Setup

Parameter

Values

Description

Protocol lockout

0 - 255

The number of invalid login attempts before access is denied.

If protocol lockout = 0, there is no limit to the number of invalid login attempts and
the protocol will never be locked out.

Session timeout

1 - 43200 minutes (30
days)

The interval between access checks for non-session based protocols.

Related Topics

•

Recommended security configuration

•

Protocols, ports and connections

Configuring users and passwords using ION Setup (advanced
security only)

Use ION Setup to configure users and passwords.

In order to change security settings, you must be logged into ION Setup with an
appropriate ION Setup user level. You must also have the appropriate meter-level
security access to configure meter security.

You must have configured the standard security settings on your meter using ION
Setup.

This task assumes that you are in the user configuration screen in the security
wizard in ION Setup.

1. In the user/passwords screen, select (check) the user that you want to

configure to view the user access options.

120

7EN05-0390-00

Содержание 9810 Series



























































































































































































































Результаты поиска

Содержание 9810 Series

Отзывы:

Siemens 9810 Series, Руководство пользователя, Страница: 120 / 218

Результаты поиска

Содержание 9810 Series

Отзывы: