Sharp MX-C607P Скачать руководство пользователя страница 117

Страница: 117 / 190

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing
until you are ready to use them.

Do not expose supplies to:

•

Direct sunlight

•

Temperatures above 35°C (95°F)

•

High humidity above 80%

•

Salty air

•

Corrosive gases

•

Heavy dust

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 20 kg (44 lb), then it may require

two or more people to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Maintaining the printer

117

Содержание MX-C607P































































































































































































Результаты поиска

Содержание MX-C607P

Отзывы:

Похожие инструкции для MX-C607P

Бренды по названию

Популярные бренды

Sharp MX-C607P, Руководство пользователя

Результаты поиска

Содержание MX-C607P

Отзывы:

Похожие инструкции для MX-C607P

Бренды по названию

Популярные бренды