manualshive.com logo in svg

Sharp MX-2301N, Руководство по эксплуатации, Страница: 381 / 817

Поделиться
Скачать
Sharp MX-2301N Скачать руководство пользователя страница 381

4-56

FACSIMILE

Contents

FORWARDING RECEIVED FAXES
(Fax Data Forward)

When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another 
previously programmed fax machine.
This function is convenient in an office or work area that has two or more telephone lines and another fax machine is 
connected to a different line than the machine.

Forwarding of received faxes is executed in the system settings of the machine. Press the [SYSTEM SETTINGS] key on 
the operation panel to display the system setting menu screen in the touch panel. Select [Fax Data Receive/Forward] - 
[Fax Data Forward], check the message that appears, and then touch the [Yes] key.

• If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be 

forwarded.

• A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was 

cancelled or an error occurred, the fax will be held in memory until it can be printed.

• All faxes received are forwarded. Note, however, that faxes received to an F-code confidential memory box cannot be 

forwarded.

• If a password entry screen appears after touching the [OK] key, "Hold Setting for Received Data Print" has been enabled. 

Enter the password with the numeric keys to begin forwarding.

☞

PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print)

 (page 4-55)

•

System Settings: 

Fax Data Receive/Forward

 (page 7-151)

Use this to forward received faxes when the machine is unable to print.

•

System Settings (Administrator): Set the Telephone Number for Data Forwarding

This is used to store the forwarding fax number.

The machine cannot print

Printing

Forwarding

Received fax

The machine

Forwarding 
destination

Downloaded From ManualsPrinter.com Manuals

Содержание MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов