manualshive.com logo in svg

Sharp MX-2301N, Руководство по эксплуатации, Страница: 380 / 817

Поделиться
Скачать
Sharp MX-2301N Скачать руководство пользователя страница 380

4-55

FACSIMILE

Contents

PRINTING A PASSWORD-PROTECTED FAX 
(Hold Setting For Received Data Print)

"Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to 
memory without being printed. To print the faxes, a password must be entered. When this function is used, a password 
entry screen appears in the touch panel when a fax is received.

When the previously programmed 4-digit password is entered with the numeric keys, printing begins.
The [Cancel] key can be touched to close the password entry screen. If this is done, the data in memory key (

) will 

blink in the touch panel. The password entry screen will reappear when you touch the blinking key (

) or change 

modes.

• The received faxes will be retained in memory regardless of whether they were received automatically or manually.

• If "Fax Data Receive/Forward" is executed in the system settings to forward received faxes to another machine, faxes 

retained in memory will also be forwarded. At that time, the same password entry screen as for printing will appear. 
Forwarding will not take place unless the password is entered.

System Settings (Administrator): Hold Setting for Received Data Print

Enable this setting to have received faxes retained in memory until a password is entered. This setting is also used to 
program the password.

Received data is stored.
Enter password via the 10-key.

Cancel

Downloaded From ManualsPrinter.com Manuals

Содержание MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов