Sharp JX-8200, Руководство по обслуживанию

Страница: 196 / 206

NAME DESCRIPTION SIGNAL KIND
POUT_ Paper detector signal (Paper exit section) (Detection at LOW) DETECT
PRST Print start signal COMMAND
PS0 Standard cassette size detection signal 0 (Detection at HIGH) DETECT
PS1 Standard cassette size detection signal 1 (Detection at HIGH) DETECT
PS2 Standard cassette size detection signal 2 (Detection at HIGH) DETECT
PS3 Standard cassette size detection signal 3 (Detection at HIGH) DETECT
PS4 Standard cassette size detection signal 4 (Detection at HIGH) DETECT
PSAS_ Separation pawl solenoid drive signal (Drive at LOW) DRIVE
PSC_ Resist roller clutch drive signal (Drive at LOW) DRIVE
PUS_ Paper pick-up clutch drive signal (Standard paper feed unit) (Drive at LOW) DRIVE
READY_ Printer engine ready signal (Used to notify ICU that the printer engine is ready for printing.
LOW at print ready.) STATUS
RESET_(RES) Reset signal (Used to reset the printer engine and ICU. Becomes LOW for a certain period
immediately after turning on the power to perform resetting.) RESET
RH Humidity sensor detection signal (The sensor output signal is increased in proportion to
temperature rise.) SENSE (ANALOG)
RTH Fusing temperature sensor signal (The sensor output signal is increased in proportion to
temperature rise.) SENSE (ANALOG)
RTH2 Temperature sensor detection signal (The sensor output signal is increased in proportion to
temperature rise.) SENSE (ANALOG)
S0 Select signal S0 SELECT (DATA)
S1 Select signal S1 SELECT (DATA)
S10 Select signal S10 SELECT (DATA)
S11 Select signal S11 SELECT (DATA)
S12 Select signal S12 SELECT (DATA)
S13 Select signal S13 SELECT (DATA)
S14 Select signal S14 SELECT (DATA)
S15 Select signal S15 SELECT (DATA)
S16 Select signal S16 SELECT (DATA)
S17 Select signal S17 SELECT (DATA)
S18 Select signal S18 SELECT (DATA)
S19 Select signal S19 SELECT (DATA)
S2 Select signal S2 SELECT (DATA)
S20 Select signal S20 SELECT (DATA)
S21 Select signal S21 SELECT (DATA)
S22 Select signal S22 SELECT (DATA)
S23 Select signal S23 SELECT (DATA)
S24 Select signal S24 SELECT (DATA)
S25 Select signal S25 SELECT (DATA)
S26 Select signal S26 SELECT (DATA)
S27 Select signal S27 SELECT (DATA)
S3 Select signal S3 SELECT (DATA)
S4 Select signal S4 SELECT (DATA)
S5 Select signal S5 SELECT (DATA)
S6 Select signal S6 SELECT (DATA)
S7 Select signal S7 SELECT (DATA)
S8 Select signal S8 SELECT (DATA)
S9 Select signal S9 SELECT (DATA)
SEN1_ Sensor strobe signal (Used to select sensor/detector signals. STROBE
SEN2_ Sensor strobe signal (Used to select sensor/detector signals. STROBE
SRDY_ Sensor strobe signal (Used to select sensor/detector signals. STATUS
STS Print engine status data signal (SIS) STATUS
STSELS_ Developing unit shutter solenoid drive signal (Drive at LOW) DRIVE
SYNC_(SYNCG) Laser beam (scanner) horizontal sync signal (Outputted every time when scanned by laser
beam sensor detection signal.) DETECT (SYNCHRONOUS)
TBCON Transfer bias voltage control signal (When the voltage is increased, the transfer bias voltage
is also increased.) CONTROL (ANALOG)
TBON_ Transfer bias ON signal (Transfer bias voltage is outputted at LOW.) CONTROL
SHARP SERVICE MANUAL JX8200SM [13] ELECTRICAL SECTION
13 – 37