Seneca S6001, Руководство пользователя

Страница: 75 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
75 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
1.1.7.4 “Analogue thresholds” screen
65
64
67
66
Fig. 61 “Analogue thresholds” screen
64
Field to display and enter the analogue threshold value “HH”, for the single analogue inputs.
Press on the field to enter, using the numeric keypad, the value of the desired analogue
threshold “HH”, for each analogue input.
65
Field to display and enter the analogue “H” threshold value for the individual analogue inputs.
Press on the field to enter, using the numeric keypad, the value of the desired analogue
threshold “H”, for each analogue input.
66
Field to display and enter the analogue “L” threshold value, for the individual analogue inputs.
Press on the field to enter, using a numeric keypad, the value of the desired analogue thresh -
old “L”, for each analogue input.
67
Field to display and enter the analogue threshold value “LL”, for the single analogue inputs.
Press on the field to enter, using the numeric keypad, the value of the desired analogue
threshold “LL”, for each analogue input.
Tab. 60 “Analogue thresholds” screen
It is possible to set these 4 thresholds so that alarms are triggered when they are exceeded. The
values monitored by these 4 thresholds are associated with analogue inputs Al01, Al02, Al03 and
Al04, in particular:
- Threshold HH is the threshold with maximum value; the alarm is triggered when AI > HH;
- Threshold h is the threshold with medium-high value; the alarm is triggered when AI > H;
- Threshold L is the threshold with medium-low value; the alarm is triggered when AI < L;
- Threshold LL is the threshold with minimum value; the alarm is triggered when AI < LL.