Seneca S6001, Руководство пользователя

Страница: 54 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
54 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
- Select the number of pumps available using the and
keys.
- If necessary, press the key to return to the previous
screen.
- Press the key to confirm.
Fig. 35 Level wizard - Number of pumps
- Check the settings made are correct.
- If necessary, press the key to return to the previous
screen.
- Press the key to confirm.
Fig. 36 Level wizard - System summary
If the “probe” or “probe and floats” have been selected as adjustment tools, the following screen is
displayed.
- Press on the “IS” Scale Start field to enter the
corresponding value using the displayed keypad.
- Press on the “
FS ” Scale End field to enter the
corresponding value using the displayed keypad.
- If necessary, press the key to return to the previous
screen.
- Press the key to confirm.
Fig. 37 Level wizard - Type of AI04 analogue input