Seneca S6001, Руководство пользователя

Страница: 50 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
50 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
The type of AI04 analogue input is automatically set according to the type of control selected in the
first step of the wizard and is intended for measuring the process variable.
When a numeric field is pressed, the
(F - Fig. 46 on page 60) keypad for entering the data
is displayed.
- Press the key corresponding to the variation mode of
the desired set point.
- If necessary, press the key to return to the previous
screen.
Fig. 26 Pressure/flow wizard - Set point variation
mode
With “HOUR SCHEDULING” the variation of the set point takes place on a time basis, with “DIGITAL
INPUT VARIATION” the variation of the set point is based on the variation of a settable digital input.
If “DIGITAL INPUT VARIATION” has been selected, the following screen is displayed.
- Press on the corresponding fields to enter the set point
values using the displayed keypad.
- If necessary, press the key to return to the previous
screen.
- Press the key to confirm.
Fig. 27 Pressure/flow wizard - Set point allocation
The base Set Point is the value that the system must reach through pressure/flow regulation.
The first and second regulation Set Points are the values that the system must reach when they are
active.
For further information, please refer to
“1.1.7 “Set point” page” on page 71 .