Seneca S6001, Руководство пользователя

Страница: 13 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
13 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
Reference/Terminal No. Description
P3/57, 58, 59 RS485 port (COM 2)
P4 RS232 port (COM 1)
P5 USB port
P6 SD card port
P7 SIM card port
P8 Main 3G antenna connector
P9 Diversity 3G antenna connector
Tab. 3 RTU connector/port description
Port (P6 - Fig. 2 on page 12) is not used by the system.
For further information, please refer to “1.9.2 Electrical technical characteristics” on page 17 .
Group Number Colour Status Meaning
DIGITAL INPUTS
(digital inputs)
1,2,3,4,5,6,7,8,9,
10,11,12,13,14,15
Green
ON High
OFF Low
DIGITAL OUTPUTS
(digital outputs)
1,2,3,4,5,6,7,8 Red
ON High
OFF Low
3G PWR SIG.
(3G signal power)
1,2,3,4,5,6 Yellow
ON
Signal present
(6 ON = Max)
OFF
Signal absent
(1 Flashing = Min)
COM PORT COM2
(common port COM 2) RX,TX
Red Flashing RS485 active
Red ON Connection check
COM PORT COM4
(common port COM 4) RX,TX
Red Flashing RS485 active
Red ON Connection check
RUN (operation) 1 Red Flashing Working
LEVEL SWITCH
(level switch)
L1, L2 Green
OFF, OFF (value 0) Below the minimum level
ON, OFF (value 1)
Included between the
minimum and maximum
level
ON, ON (value 2) Above the maximum level
Tab. 4 RTU signalling LED - operation