Seneca S6001, Руководство пользователя

Страница: 80 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
80 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
I/O Possible configuration Configuration description
DI05÷DI17
None The input is free, non configured.
Reserved
In the system configuration currently in use, the input
is non-configurable.
External alarm
Alarm signal from electromechanics external to the
system. The system will treat it as a non-blocking
alarm.
Feedback hw RUN from generic inverter Signal of inverter running coming directly from the in
-
verter. To be used if the type of inverter is set to wired.
Cumulative alarm from generic inverter Alarm signal from the inverter.
Selection of adjustment Set Point 1
Use Set Point 1 instead of the basic adjustment Set
Point.
Selection of adjustment Set Point 2
Use Set Point 2 instead of the basic adjustment Set
Point.
AUT station
Signal used to set pump management by the system,
in “automatic” or “manual” mode. The possible input
states are:
ON = automatic, OFF = total stop
AUT P1
Signal used to set pump 1 in “automatic” or “manual”
mode The possible input states are:
ON = automatic, OFF = manual
AUT P2
Signal used to set pump 2 in “automatic” or “manual”
mode The possible input states are:
ON = automatic, OFF = manual
AUT P3
Signal used to set pump 3 in “automatic” or “manual”
mode The input possible states are:
ON = automatic, OFF = manual
AUT P4
Signal used to set pump 4 in “automatic” or “manual”
mode The input possible states are:
ON = automatic, OFF = manual