Seneca S6001, Руководство пользователя

Страница: 103 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
103 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
Code
Alarm
Description Cause Solution
OT047 PUMP 1 ABSORPTION (A) - LL
A “PUMP ABSORPTION 1” sig -
nal has been configured among
the configurable analogue in -
puts and the probe measures
a value lower than the value
set in the LL parameter in the
SETPOINT> ANALOGUE
THRESHOLDS section of the
HMI panel
- Check the correct configu -
ration of the digital inputs in
the SETPOINT > ANALOGUE
THRESHOLDS section of the
HMI panel. Check the wiring of
the adjustment probe is correct.
OT048 PUMP 1 ABSORPTION (A) - L
A “PUMP ABSORPTION 1”
signal has been configured
among the configurable an -
alogue inputs and the probe
measures a value lower than
the value set in the L parameter
in the SETPOINT> ANALOGUE
THRESHOLDS section of the
HMI panel
- Check the correct configu -
ration of the digital inputs in
the SETPOINT > ANALOGUE
THRESHOLDS section of the
HMI panel. Check the wiring of
the adjustment probe is correct.
OT049 PUMP 1 ABSORPTION (A) - H
A “PUMP ABSORPTION 1” sig -
nal has been configured among
the configurable analogue in -
puts and the probe measures
a value higher than the val -
ue set in the H parameter in
the SETPOINT> ANALOGUE
THRESHOLDS section of the
HMI panel
- Check the correct configu -
ration of the digital inputs in
the SETPOINT > ANALOGUE
THRESHOLDS section of the
HMI panel. Check the wiring of
the adjustment probe is correct.
OT050
PUMP 1 ABSORPTION (A) -
HH
A “PUMP ABSORPTION 1” sig -
nal has been configured among
the configurable analogue in -
puts and the probe measures
a value higher than the val -
ue set in the HH parameter in
the SETPOINT> ANALOGUE
THRESHOLDS section of the
HMI panel
- Check the correct configu -
ration of the digital inputs in
the SETPOINT > ANALOGUE
THRESHOLDS section of the
HMI panel. Check the wiring of
the adjustment probe is correct.
OT051 PUMP 2 ABSORPTION (A) - LL
See CAUSE and SOLUTION
of ALARMS OT047, OT048,
OT049, OT050 for the “PUMP 2
ABSORPTION” signal
OT052 PUMP 2 ABSORPTION (A) - L