Seneca S6001, Руководство пользователя

Страница: 14 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
14 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
Find below further information on how the LEDs operate:
ƒ
At power-up, during the loading phase, all the LEDs, with the exception of the COM port LEDs, are ON; when
the system is fully operational, the operation LED flashes.
ƒ The 3G+ signal power LED 1 flashes, in sync with the operation LED, in the following situations:
−
the GSM/3G+ network is not available (or the signal level is too low);
− the SIM is not inserted;
− the modem is not present.
LED Status Meaning
3G+ PWR Green ON The 3G+ modem is ON
STAT yellow
ON Not recorded on the GSM network
Slow flashing Recorded on the GSM network
Fast flashing PPP connection active
Tab. 5 RTU signalling LED - Modem
1.6.2 HMI
1,2,3
P1
P3
P2
Fig. 3 HMI
The HMI (Fig. 3 on page 14) is equipped with:
ƒ Power supply (1,2,3 - Fig. 3 on page 14) ,
ƒ communication ports (P1 - Fig. 3 on page 14) ,,
on which more detailed information is provided in the following tables.