SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 108 / 398

5-14
5
4. Stop the engine.
5. Remove the special service tool
1
, and
then remove the thermo sensor 2 .
6. Connect the special service tool
1
, and
then place the thermo sensor
2
in a con-
tainer of water and slowly heat the water.
7. Measure the thermo sensor resistance at
the specified water temperatures.
8. Remove the special service tool
1
,
install the thermo sensor
2
, and then
connect the thermo sensor coupler.
9. Install the manual starter and driven
sprocket cover. See “Installing the man-
ual starter” (7-10). (Manual starter
model)
Install the flywheel magnet cover and
driven sprocket cover. (Electric starter
model)
Checking the oil pressure switch
1. Disconnect the oil pressure switch con-
nector
a
.
2. Start the engine, and then measure the
oil pressure switch
1
input voltage.
3. Stop the engine.
4. Remove the oil pressure switch 1 .
5. Connect the special service tool 2 to the
oil pressure switch.
6. Apply positive pressure to the oil pres-
sure switch
1 slowly, and then check
that continuity changes to no continuity in
the range of the working pressure.
Replace the oil pressure switch if the
continuity does not change to no continu-
ity in the working pressure range.
Thermo sensor input voltage
(reference data):
Black/Yellow (B/Y)–Black (B)
4.75–5.25 V
Test harness (2 pins) 1 : 90890-06867
Thermo sensor resistance
(reference data):
0.372 k
Ω
at 75 °C (167 °F)
2
1
G
G/W
Oil pressure switch input voltage
(reference data):
Pink (P)–Ground
12.0 V (battery voltage)
P P
1
a
a
1
2
Ignition unit and components