SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 375 / 398

10-5
MNT
Maintenance
È
Tiller handle model
É
Remote control model
3. Check that the engine stops when the
clip is pulled from the engine shut-off
switch.
È
Tiller handle model
É
Remote control model
Checking the fuel system
1. Check that the fuel hoses are securely
connected. To check the fuel hose con-
nections, see “Fuel hose, blowby hose,
and cooling water hose” (6-1).
NOTICE:
This is a 4-stroke engine. Never use
premixed fuel or 2-stroke outboard
motor oil.
Checking the gear oil level
1. Put the outboard motor in an upright
position.
2. Remove the check screw
1
, and then
check the gear oil level.
TIP:
If the oil is at the proper level, a small amount
of oil should flow out of the check hole.
3. Install a new gasket
2
and the check
screw
1
, and then tighten the check
screw
1
to the specified torque.
Checking the gear shift and throttle
operation
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to move the remote control lever
or the throttle grip, which could result in
an accident.
1. Check that the gear shift operates
smoothly when the shift lever is moved
from the N to the F or R position. (Tiller
handle model)
Check that the gear shift operates
smoothly when the remote control lever
is moved from the N to the F or R posi-
tion. (Remote control model)
ON
OFF
START
É
È
É
Check screw
1
:
9 N·m (0.9 kgf·m, 6.6 ft·lb)
1
2