SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 173 / 398

7-25
POWR
Power unit
2. Install the dowel 6 , driven sprocket 7 ,
and washer 8 , and then tighten the bolt
9 to the specified torque.
3. Align the notch
a
in the drive sprocket
2
with the protrusion
b
on the cylinder
block.
4. Align the “1” mark
c
on the driven
sprocket
7
with the “ ” mark
d
on the
cylinder head.
5. Install the timing belt
A
onto the drive
sprocket 2 , and then install it onto the
driven sprocket
7
so that the part num-
ber
e
is in the upright position. NOTICE:
Do not apply grease or oil to the tim-
ing belt.
6. Turn the crankshaft clockwise 2 full turns
until the notch
a
in the drive sprocket 2
is aligned with the protrusion
b
on the
cylinder block. Check that the “1” mark
c
on the driven sprocket 7 is aligned with
the “ ” mark
d
on the cylinder head.
Crankshaft holder
5
: 90890-06355
Drive sprocket nut 4 :
150 N·m (15.0 kgf·m, 110.6 ft·lb)
Flywheel holder
0
: 90890-06522
Driven sprocket bolt
9
:
38 N·m (3.8 kgf·m, 28.0 ft·lb)
5
4
5
9
8
7
6
E
0
9
2
b
a
c
d
7
6C5-462XX-XX
A
2
e
7