SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 258 / 398

8-40
8
Checking the dog clutch
See “Checking the dog clutch” (8-9).
Checking the propeller shaft housing
See “Checking the propeller shaft housing”
(8-9).
Checking the reverse gear
See “Checking the reverse gear” (8-9).
Assembling the propeller shaft
assembly
See “Assembling the propeller shaft assem-
bly” (8-9).
Assembling the propeller shaft
housing assembly
Do not reuse a bearing, oil seal, or O-ring,
always replace it with a new one.
1. Install a new needle bearing
1
to the
specified depth
a
.
TIP:
Face the identification mark
b
on the needle
bearing toward the propeller side.
2. Install new oil seals
5
to the specified
depth
c
.
TIP:
Install an oil seal halfway into the propeller
shaft housing, and then install the other oil
seal.
3. Install the original reverse gear shims
8
and a new ball bearing
9
.
TIP:
Face the identification mark
d
on the ball
bearing toward the reverse gear.
4. Install the reverse gear assembly A .
Bearing depth plate
2
: 90890-06603
Driver rod SS
3
: 90890-06604
Needle bearing attachment
4
:
90890-06614
Depth
a
: 23.5–24.0 mm (0.93–0.94 in)
a
G
1
b
4
2
3
Driver rod LS
6
: 90890-06606
Ball bearing attachment
7
: 90890-06637
Depth
c
: 4.0–4.5 mm (0.16–0.18 in)
Bearing inner race attachment
0
:
90890-06639
5
c
6
7
A A
9
G
d
0
8
Propeller shaft housing (high thrust model)