SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 212 / 398

7-64
7
4. Install the crankpin bearings
4
into the
connecting rod
a
and connecting rod
cap
k
.
TIP:
• Install the crankpin bearings in the original
positions.
• Fit the protrusions
m
on the crankpin bear-
ings into the slots
n
in the connecting rod
a
and connecting rod cap
k
.
5. Install the piston with the “UP” mark on
the piston crown facing towards the fly-
wheel magnet.
6. Install the crankshaft journal bearings
6
.
TIP:
Install the crankshaft journal bearings
6
in
the original positions.
7. Install the balancer rod 7 and new oil
seals 8 and 9 onto the crankshaft 0 ,
and then install the crankshaft.
TIP:
• Make sure to install the oil seals into the
cylinder block so that the oil seals are
securely seated at the stopped area.
• Make sure that the protrusion
p
on the bal-
ancer rod 7 face towards the flywheel
magnet end of the crankshaft.
8. Install the connecting rod caps
k
to the
connecting rods, and then tighten the
connecting rod bolts
A to the specified
torques in 2 stages.
Piston slider 5 : 90890-06529
E
E
#3
#4
#5
e
f
g
h
h
#1
#2
45 45
#3
#4
#5
#1
#2
n
a
k
4
4
E
m
n
E
5
E
E 6
6
E
E
E
E
8
p
7
0
9
0
8
9
0
Cylinder block