SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical notice
FI 72.0567.0221E
Page 30 / 45
Manual mode :
From this page, it is possible, regardless of the presence of the run order, to force either:
•
continuous declogging
•
a certain number of declogging cycles
•
the activation of a solenoid valve
Access at Maintenance or Manufacturer level.
Forcing continuous declogging :
1. Allows you to activate or deactivate the manual forcing of continuous declogging by pressing the On / Off
button
Forcing declogging n cycles :
2. Number of declogging cycles to be performed in forced / manual mode
Adjustable from 0 to 255.
3. Validation / launch of the n cycles set.
4. Countdown of the number of manual declogging cycles remaining to be performed
Forcing solenoid valve activation :
5. Cell number of the solenoid valve to activate
Display of the cell name
6. Number of the solenoid valve in the cell to activate
Display of the solenoid valve name
7. Activation of the solenoid valve selected above.
Note: the solenoid valve is activated for time T1 on each press
1
2
5
6
7
3
4
