SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical notice
FI 72.0567.0221E
Page 23 / 45
3. Number of the selected step
Possibility to select the step number either by selecting the step in table "7" or by button "10" "Go to
Shooting n °"
4. Number of the cell and the solenoid valve of the cell stored, associated with the number of the selected
step
5. New values of the cell and solenoid valve of the cell to be stored for the number of the selected step.
6. "Validate" key to save the new set values.
After validation, the shooting sequence table is updated
7. Table of the ONLINE declogging sequence stored
8. Access to previous steps
9. Access to the next steps
10. Direct access to a step number
Note: If in a step, the cell number or the sv number is set to 0, then that step is ignored. This can allow, for example,
to temporarily remove the activation of an SV in the cycle.
