SEFRAM SFX+V2, Руководство пользователя

Страница: 8 / 45

SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical notice FI 72.0567.0221E Page 8 / 45
There are two leds (yellow and red) on the slave board:
Note: possibility of having a local user interface: contact us.
Protections on slave board :
Table 1 : Voltage solenoid valves AC
Supply voltage 230VAC 115VAC 48VAC 24VAC
Solenoids valves voltage 230VAC 48VAC 48VAC 24VAC 24VAC 24VAC 115VAC 48VAC 24VAC
fuse F1 caliber
General protection F1A F1A F1.6A F1.6A
fuse F2 caliber
General protection F1A F1A F1.6A F1.6A
fuse F3 caliber
SV protection F1A F1A F1A F1A
The protection fuses are accessible after dismounting the front panel of the box. The fuses are located at the top left
of the board:
Fuses F1 and F2 :
Device general protection
5x20mm
Caliber: see table 1
Fuse F3 :
SV outputs protection
5x20mm
Caliber: see table 1
If communication on slave bus detected:
Yellow led: representative of receptions (RX)
Red led: representative of transmissions (TX)
If no communication detected on slave bus:
Yellow led: off
Red led: flashes regularly