SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical notice
FI 72.0567.0221E
Page 20 / 45
Sequencer / filter configuration (4/4) :
From this page, it is possible to name the solenoid valves constituting the filter.
For this part, it is considered that the name of a solenoid valve consists of:
•
A prefix identical to all solenoid valves of the same cell
•
Followed by a solenoid valve number. Number incremented by 1 for the next one
It is therefore just necessary to record the name of the 1st solenoid valves of each cell.
The following solenoid valves are renamed automatically.
For all other names, it will be necessary to provide it during the project study.
These names then appear in the CYCLE page, page where it is possible to view the progress of the
declogging cycle.
Naming only possible at manufacturer level.
1
2
3
4
5
