Seepex BN 5-12 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 239 / 309

www.weg.net
Manual of Electric Motors 70
E
N
G
LI
S
H
3. Install a second pair of eyebolts, as shown in Figure 4.10;
4. Reduce the load on the first pair of eyebolts to start the motor rotation, as shown in Figure 4.11. This
procedure must be carried out slowly and carefully.
These procedures will help you to move motors designed for vertical mounting. These procedures are also
used to place the motor from the horizontal position into the vertical position and vertical to horizontal.
Figure 4.10 - Installation of the second pair of eyebolts
Figure 4.11 - End result: motor placed in vertical position
Figure 4.12 - Lifting HGF motor with two hoists
4.1.3.2. Procedures to place HGF motors in the vertical position
HGF motors are fitted with eight lifting points: four at drive end and four at non-drive end. The HGF motors are
usually transported in horizontal position, however for the installation they must be placed in the vertical
position.
To place an HGF motor in the vertical position, proceed as follows:
1. Lift the motor by using the four lateral eyebolts and two hoists, see Figure 4.12;
Page 141