Seepex BN 5-12 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 238 / 309

www.weg.net
Manual of Electric Motors 69
E
N
G
LI
S
H
4.1.3. Vertical motors
For vertical mounted motors, as shown in Figure 4.7, the use of a spreader bar is required for maintaining the
lifting element (chain or rope) in vertical position and thus preventing damage to the motor surface.
4.1.3.1. Procedures to place W22 motors in the vertical position
For safety reasons during the transport, vertical mounted Motors are usually packed and supplied in horizontal
position.
To place W22 motors fitted with eyebolts (see Figure 4.6), to the vertical position, proceed as follows:
1. Ensure that the eyebolts are tightened properly, as shown in Figure 4.1;
2. Remove the motor from the packaging, using the top mounted eyebolts, as shown in Figure 4.9;
Figure 4.7 - Lifting of vertical mounted motors
Figure 4.8 - Lifting of HGF motors
Figure 4.9 - Removing the motor from the packaging
Always use the eyebolts mounted on the top side of the motor, diametrically opposite, considering the
mounting position. See Figure 4.8.
Page 140