sebaKMT Correlux C-300 Скачать руководство пользователя страница 44

Страница: 44 / 57

Offline correlation (multiple-point measurement)

Step Description

In the display area, use the arrow keys to set the desired offline measurement
mode (for example,

COR MS

3 with microphone

Click on the large button between the two arrow keys.

Result:

The display changes to the next programming step: “Sensor selection”.

At the top of the display area, a name is suggested for this measurement. This
automatically generated name contains the date and time at which the
measurement was created in the CorreluxView-3 software.

The individual fields, up to 8, in the display area stand for the sensors that are
registered in the offline pool of the software.

You can enter a new name for this measurement or keep the automatically
generated name.

You can also change the name later.

Select which sensors will be used in the measurement.

Click on the checkbox next to the sensor number to set/remove the checkmark.

Chekmark is set;

Sensor will be used

Checkmark is not set;

Sensor will not be used

Only sensors that have a checkmark will be programmed and used in the
measurement.

Then click

Go on

Result:

The display changes to the next programming step, “Measurement time”.

Use the two radio buttons to decide whether an instantaneous measurement or a
night measurement will take place.

Instantaneous measurement

(The measurement begins directly after

placement of the sensors and lasts

2 minutes and 30 seconds.)

Custom measurement

(Start and end time of the

measurement are defined by the user.)

In the

Time offset

field, set the amount

of time that you will need to place all
sensors at the measurement points.

The specified amount of time is used
after programming as a “countdown until
the measurement”.

Enter in the field

Start of meas.

the time at which the

measurement should start.

Enter in the field

End of meas.

the time at which the

measurement should end.

Click

Program sensor

Содержание Correlux C-300


























































Результаты поиска

Содержание Correlux C-300

Отзывы:

Похожие инструкции для Correlux C-300

Бренды по названию

Популярные бренды

sebaKMT Correlux C-300, Руководство пользователя

Результаты поиска

Содержание Correlux C-300

Отзывы:

Похожие инструкции для Correlux C-300

Бренды по названию

Популярные бренды