sebaKMT Correlux C-300, Руководство пользователя

Страница: 22 / 57

The Multi sensors
22
Example:
Serial number (SN): 0889000594
Identification number (ID): 000594
Entry on the computer: 594
You can enter the ID manually on the computer or use the “automatic detection”
function. Automatic detection means: If you briefly move a magnet near the I/O area of
the Multi sensor, the ID of the device is sent to the computer and recognised there.
6.3 Power supply
The Multi sensors are fitted with internal rechargeable Li-Ion batteries This can power
the device for at least 16 hours.
When the battery level of a Multi sensor falls below a certain threshold, the indicator
light of the device will flash red. The device must be charged. Otherwise, it switches
itself off automatically.
In the sensor pool of the CorreluxView-3 software, you will also find an indication on the
battery status, provided the corresponding Multi sensor is logged on there and currently
available.
To charge the Multi sensors place them in the transport case. The case must be
connected to a power supply. As soon as the sensors are situated at their storage
places in the case, they are recharged inductively.
Charging takes approximately 6 hours. The units' indicator lights are rapidly flashing
during the charging process. The indicator lights turn to permanent green light as soon
as the battery is full.
CAUTION
No objects must be put into empty charging stations.
Risk of fire!
The charging stations are for transport and charging of the devices only.
NOTE
Any repairs must be carried out by an authorized service partner.
Otherwise, the devices' resistance against water and dirt cannot be
guaranteed.
Do not open the devices yourself. If you have problems with the battery,
please contact your SebaKMT service partner.
Battery level
Charging