sebaKMT Correlux C-300, Руководство пользователя

Страница: 35 / 57

Sensor management
35
8.3 Adding sensors to the sensor pool
Proceed as follows to add sensors to the sensor pool:
Step Description
1 If you want to register sensors for the offline measurement, open the Offline
correlation tab.
If you want to register sensors for the online measurement, open the Online
correlation tab.
2
To register Multi sensors, click on the button.
To register Power transmitters, click on the button.
Result:
The window for registering sensors opens.
3
Register the desired sensors, either by entering or automatic detection of the
sensor ID:
Manual entry
•
Enter the identification number of
the sensor concerned in the input
field.
•
Confirm the input with the or
button in the same window.
Result:
The sensor is added to the
sensor pool.
•
Add more sensors in succession.
Automatic detection
•
Click on the button.
Result: The “Automatic detection”
feature is now enabled. The
COR C-300-RI radio interface searches
for sensors in the vicinity.
•
On the Power transmitter, briefly press
the I/O button.
On the Multi sensor, touch the
I/O surface briefly with a magnet.
Result: The ID of the sensor is detected
by the computer and displayed in the
registration window.
•
Confirm the displayed ID with the or
button in the same window.
Result: The sensor is added to the
sensor pool.
•
Add more sensors in succession.
•
Click on the button to deactivate
the “Automatic detection” feature.
4 Close the registration window.