sebaKMT Correlux C-300, Руководство пользователя

Страница: 16 / 57

COR C-300-RI radio interface
16
The COR C-300-RI device serves as the radio interface between the computer and the
Power transmitters or Multi sensors. In addition, the supplied headphones can be
connected to the device to listen to the recorded leak noises.
4.2 Power supply
The COR C-300-RI device is supplied with power via the USB connection to the
computer.
4.3 Start-up
The following prerequisites must be met:
•
The CorreluxView-3 software must be installed on the computer.
Otherwise the radio interface will not be recognised by the computer.
•
The CorreluxView-3 software should not be opened yet when connecting the radio
interface.
•
The two included antennas must be correctly connected to the C-300-RI.
The short antenna is screwed onto the connection socket .
The long antenna is plugged into the connection socket and screwed down with a
quarter turn to the right. You must feel the antenna engage.
The device is connected to a USB port of the computer. Use the included USB
connection cable.
When connected the first time, the operating system of the computer
automatically looks for the device driver for the COR C-300-RI. This process can
take some time. As long as all the LEDs of the radio interface light up at the
same time, the device is not ready for operation.
The device does not have a power switch. It switches on automatically when it is
connected to the computer. The LEDs on the device go on briefly 3 times, and then the
device is ready for use.
If the CorreluxView-3 software was open when the radio interface was
connected, it is necessary to restart the software.
The device switches itself off when it is disconnected from the computer.
Function
Requirements
Antennas
USB connection
Switching on /
Switching off